PMARC Labs builds finger-scale actuator modules for robotic hands: powered motion, position sensing, and direct force sensing in one small unit.
| Spec | 80 mm | 40 mm | 20 mm |
|---|---|---|---|
| Length | 102 mm | 72 mm | 34 mm |
| Mass | 560 g | 100 g | 12 g |
| Torque | 45 N·m | 5.5 N·m | 0.8 N·m |
| Continuous | 17 N·m | 2 N·m | 0.3 N·m |
| Resolution | 9 mN·m | 1 mN·m | 0.2 mN·m |
Torque-sensed joints exist for arms and legs. They do not exist at finger scale. A finger joint needs high gear reduction to get useful torque from a tiny motor, and that reduction buries the force signal in friction, so estimating force from motor current simply stops working.
PMARC Labs measures torque on the output side of the gearing, with a flexure built into the module, so each reading is the load the joint actually carries. The module is small enough to be the finger joint itself, and its mechanism was first proven at palm scale in the PMARC Cube.
Proved the variable-resistance mechanism at palm scale.
View PMARCEngineering the joint-scale actuator module for production.
Inside the moduleThe first run of modules, each calibrated before it ships.
Read the thesisA hand builder designs the module into a prototype hand.
Get in touchWe work with companies and labs that are building dexterous and humanoid hands.